САЛЬНИК ДИФФЕРЕНЦИАЛА ЗАМЕНА

  1. REMOVE FRONT LOWER BUMPER ABSORBER

    A00OL3A

    1. Remove the 2 screws and 4 bolts.

    2. Remove the 3 screws, 8 bolts and front lower bumper absorber.

      A00OI9A

  2. REMOVE NO. 1 ENGINE UNDER COVER

    1. Снимите 10 фиксаторов и защиту картера.

      A00ON3U

  3. DRAIN AUTOMATIC TRANSAXLE FLUID

    1. Remove the drain plug and gasket, and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  4. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH AND RH

    Click here

  5. REMOVE DRIVE SHAFT BEARING BRACKET

    1. Remove the 3 bolts and bracket.

  6. REMOVE TRANSAXLE HOUSING OIL SEAL LH AND RH

    A00OKJVE03

    1. Using SST, tap out the oil seal LH.

      SST
      09308-00010

    2. Using SST, tap out the oil seal RH.

      A00OHSIE03
      SST
      09308-00010

  7. INSTALL TRANSAXLE HOUSING OIL SEAL LH AND RH

    A00OIBKE01

    1. Coat the lip of a new oil seal LH with MP grease.

    2. Using SST and a hammer, tap in the oil seal LH.

      SST
      09649-17010
      09950-70010   ( 09951-07150 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

    3. Coat the lip of a new oil seal RH with MP grease.

      A00OLAEE01

    4. Using SST and a hammer, tap in the oil seal RH.

      SST
      09316-60011   ( 09316-00011 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  8. INSTALL DRIVE SHAFT BEARING BRACKET

    1. Install the drive shaft bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 650 kgf*cm, 47 ft.*lbf }

  9. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH AND RH

    Click here

  10. ADD AUTOMATIC TRANSAXLE FLUID

    Fluid type
    Toyota Genuine ATF WS

  11. INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL

    Click here

  12. INSTALL NO. 1 ENGINE UNDER COVER

    1. Закрепите защиту картера 10 фиксаторами.

      A00ON3U

  13. INSTALL FRONT LOWER BUMPER ABSORBER

    A00OI9A

    1. Install the front lower bumper absorber with the 8 bolts and 3 screws.

    2. Install the 2 screws and 4 bolts.

      A00OL3A