ЖГУТ ЭЛЕКТРОПРОВОДКИ ТРАНСМИССИИ ПРОВЕРКА

  1. INSPECT TRANSMISSION WIRE

    A005WDGE01

    1. Measure the resistance according to the value(s) in the table below.

      Resistance (Reference)
      Tester Connection Condition Specified Condition
      1 (THO) - 6 (E2) 10°C (50°F) 5 to 8 kΩ
      1 (THO) - 6 (E2) 25°C (77°F) 2.5 to 4.5 kΩ
      1 (THO) - 6 (E2) 110°C (230°F) 0.22 to 0.28 kΩ
      Text in Illustration
      *1

      Component without harness connected

      (Transmission Wire)

      Tech Tips

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table above, the driveability of the vehicle may decrease.

      If the result is not as specified, replace the transmission wire.