REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 REAR BUMPER PLATE

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. A01FAFQC01
      *a Hook
      B0076EM Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook to remove the No. 1 rear bumper plate.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A01F7O5C01
      B0076EM Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A01FAYT

      Remove the 2 bolts.

    3. A01F9JR

      Using a clip remover, remove the 6 clips.

    4. A01FAS0

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01FAUHC01
      *a Screwdriver
      B0076EM Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01FA85

      Disengage the 6 claws and remove the rear bumper assembly as shown in the illustration.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.