HORN REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE SUPER LOW PITCHED HORN ASSEMBLY (w/o Emergency Brake Signal)


    1. B0074TE

      Disconnect the connector.

    2. Remove the bolt and super low pitched horn assembly.

  4. REMOVE HIGH PITCHED HORN ASSEMBLY (w/ Emergency Brake Signal)


    1. B0072Q9

      Disconnect the connector.

    2. Remove the bolt and high pitched horn assembly.

  5. REMOVE LOW PITCHED HORN ASSEMBLY


    1. B0074EH

      Disconnect the connector.

    2. Remove the bolt and low pitched horn assembly.