ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL ROCKER PANEL MOULDING ASSEMBLY


    1. Install 10 new clips to the rocker panel moulding assembly.

    2. Engage the 10 clips.

    3. Install the 2 screws.

    4. Install the 6 clips.

    5. A01F708

      Engage the 2 claws to install the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the other rocker panel moulding cover.

    6. Install the clip and 2 screws.

    7. Install the rocker panel moulding assembly with the screw.

  2. INSTALL FRONT REAR WHEEL HOUSE PLATE

    Click here