REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01FBCDC12
      *A w/o Rear Fog Light
      *B w/ Rear Fog Light
      *a

      Component without harness connected

      (Rear Light Assembly LH)

      Apply battery voltage to the rear light assembly LH and check that the lights come on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 3 (E)

      		 Taillight comes on

      Battery positive (+) → Terminal 5 (B)

      Battery negative (-) → Terminal 3 (E)

      		 Stop light comes on*1

      Battery positive (+) → Terminal 4 (B)

      Battery negative (-) → Terminal 3 (E)

      		 Rear fog light comes on*2

      • *1: w/o Rear Fog Light

      • *2: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01FBCDC13
      *A w/o Rear Fog Light
      *B w/ Rear Fog Light
      *a

      Component without harness connected

      (Rear Light Assembly RH)

      Apply battery voltage to the rear light assembly RH and check that the lights come on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 3 (E)

      		 Taillight comes on

      Battery positive (+) → Terminal 5 (B)

      Battery negative (-) → Terminal 3 (E)

      		 Stop light comes on*1

      Battery positive (+) → Terminal 4 (B)

      Battery negative (-) → Terminal 3 (E)

      		 Rear fog light comes on*2

      • *1: w/o Rear Fog Light

      • *2: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly RH.