REAR LIGHT ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL REAR LIGHT GASKET


    1. B0073Q7

      Install 3 new rear light gaskets.

  2. INSTALL REAR LIGHT SOCKET AND WIRE


    1. B0076F0

      Connect the connector to install the rear light socket and wire.

  3. INSTALL REAR LIGHT SOCKET AND WIRE (for Drive Side with Rear Fog Light)


    1. B007704

      Connect the connector.

    2. Engage the clamp to install the rear light socket and wire.

  4. INSTALL REAR LIGHT GASKET LH


    1. B0077VG

      Install a new rear light gasket LH.

    2. Engage the rear light socket and wire to the slit.

    3. B0077R7C01
      B0076EM Press Area

      Press the rear light gasket LH at the area shown in the illustration to remove any gaps.

      Note

      To prevent water, foreign matter and insects from entering, make sure to press the rear light gasket LH with a sufficient amount of force.

  5. INSTALL BACK-UP LIGHT BULB


    1. B0075X7

      Install the back-up light bulb to the rear light socket and wire.

    2. B0077OE

      Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.