REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the grommet.

    2. A01F7NZC01
      *a Pin
      *b Guide

      Engage the guide and pin to temporarily install the rear combination light assembly as shown in the illustration.

    3. Install the rear combination light assembly with the 3 screws.

      Torque:
      2.3 N*m  { 23 kgf*cm, 20 in.*lbf }

    4. for LH Side:


      1. Engage the clamp.

    5. Remove the protective tape.

    6. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER


    1. A01F76S

      Install the luggage compartment trim cover to its original position as shown in the illustration.

    2. Install the clip.

  3. INSTALL REAR LIGHT COVER

    Click here

  4. INSTALL REAR BUMPER ASSEMBLY

    Click here