REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL REAR BUMPER UPPER RETAINER


    1. A01F92Z

      Engage the 2 guides to install the rear bumper upper retainer.

  2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01FA95

      Connect the connector.

    2. Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A01FAA9

      Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

    2. A01F7N1

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to connect them as a unit.