SIDE TURN SIGNAL LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. Engage the 2 guides to install the side turn signal light assembly to the No. 2 outer mirror cover.

    2. A01F94NC02
      B0076EM Protective Tape

      Hold the No. 2 outer mirror cover and side turn signal light assembly with the protective tape as shown in the illustration.

    3. Connect the connector.

    4. Engage the guide.

    5. Engage the 4 guides and 3 claws to install the visor assembly.

    6. Install the No. 2 outer mirror cover with the 5 screws.

    7. Remove the protective tape.

  2. INSTALL OUTER MIRROR

    Click here