FOG LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FOG LIGHT ASSEMBLY


    1. Engage the guide.

    2. Install the fog light assembly with the bolt and 2 screws.

      Torque:
      Bolt
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
      Screw
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    3. Engage the clamp.

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here