FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH


    1. A01F6XKC01
      *a

      Component without harness connected

      (Fog Light Assembly LH)

      Apply battery voltage to the fog light assembly LH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E)

      		 Fog light comes on

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH


    1. A01F6XKC01
      *a

      Component without harness connected

      (Fog Light Assembly RH)

      Apply battery voltage to the fog light assembly RH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E)

      		 Fog light comes on

      If the result is not as specified, replace the fog light assembly RH.