HEADLIGHT ASSEMBLY(for Single Beam Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE UPPER FRONT FENDER PROTECTOR


    1. Disengage the guide.

      B0074IYE01

    2. Using a clip remover, disengage the 3 clips.

    3. Disengage the guide to remove the upper front fender protector as indicated by the arrows, in the order shown in the illustration.

  3. REMOVE HEADLIGHT ASSEMBLY


    1. B0074TZC01
      B0076EM Protective Tape

      Apply protective tape around the headlight assembly as shown in the illustration.

    2. Disconnect the 2 connectors.

    3. Remove the 2 bolts and screw.

    4. B0072NK

      Disengage the guide to remove the headlight assembly as shown in the illustration.