| DTC Code | DTC Name |
|---|---|
| B2456 | Left Headlight ECU Variation Error |
DESCRIPTION
This DTC is stored when a headlight light control ECU sub-assembly LH which is not compatible with the vehicle has been installed. The headlight light control ECU sub-assembly LH stores DTC B2456.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2456 | Left Headlight ECU Variation Error | Incompatible headlight light control ECU sub-assembly LH is installed |
|
CAUTION / NOTICE / HINT
Note
Confirm that there are no CAN communication system malfunctions before performing the following inspection.
If the headlight light control ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight light control ECU sub-assembly LH.
PROCEDURE
CLEAR DTC
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Check for DTCs.
| OK |
|---|
| DTC B2456 is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
CHECK ECM
Check if the part number of the ECM installed to the vehicle is correct.
| OK |
|---|
| Part number is correct. |
| Result | |||
|---|---|---|---|
|
| OK |
|
REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH Click here |
| NG |
|
REPLACE ECM WITH CORRECT ONE for 8AR-FTS: Click here |