WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01F7RMC01
      *a Vehicle center line - -
      B0076EM Measurement - -
      Standard Clearance
      Area Measurement Area Measurement
      A 347 mm (13.66 in.) B 625 mm (24.61 in.)
      C 65 mm (2.56 in.) D 226 mm (8.90 in.)

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.