FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY

   
   

   1. Apply MP grease to the sliding parts of the fuel lid lock with motor assembly.

   2. Engage the claw to install the fuel lid lock with motor assembly.

   3. Engage the clamp.

   4. Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

3. INSTALL ROPE HOOK ASSEMBLY

   Click here

4. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

   Click here

5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

6. INSTALL NO. 2 ROOM PARTITION COVER

   Click here

7. INSTALL REAR SEAT SUB FLOOR PANEL

   Click here

8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

9. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

10. INSTALL SPARE WHEEL COVER TRAY

    Click here

11. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

    Click here

12. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

13. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

14. INSTALL REAR SEAT ASSEMBLY

    Click here