FRONT DOOR INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH


    1. A01F813C01
      *a

      Component without harness connected

      (Front Door Outside Handle Assembly LH)

      Apply 6.0 V (4 dry cell batteries in series) to the front door outside handle assembly LH and check that the light comes on.

      Note

      Do not apply more than 6.0 V.

      OK
      Condition Specified Condition

      Battery positive (+) → 1 (OLP)

      Battery negative (-) → 3 (GND)

      		 Illuminates

      If the result is not as specified, replace the front door outside handle assembly LH.

  2. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY RH


    1. A01F813C01
      *a

      Component without harness connected

      (Front Door Outside Handle Assembly RH)

      Apply 6.0 V (4 dry cell batteries in series) to the front door outside handle assembly RH and check that the light comes on.

      Note

      Do not apply more than 6.0 V.

      OK
      Condition Specified Condition

      Battery positive (+) → 1 (OLP)

      Battery negative (-) → 3 (GND)

      		 Illuminates

      If the result is not as specified, replace the front door outside handle assembly RH.