LUGGAGE COMPARTMENT DOOR SUPPORT REMOVAL

CAUTION / NOTICE / HINT

Note

If the luggage compartment door support assembly is removed, the luggage compartment door will slam shut. Make sure to support the luggage compartment door by hand when it is open and when opening and closing it.

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY

    Click here

  2. REMOVE LUGGAGE COMPARTMENT DOOR COVER

    Click here

  3. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  4. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER


    1. B0076G2

      Remove the No. 1 luggage compartment trim cover.

  6. REMOVE SPARE WHEEL COVER TRAY


    1. B0074YF

      Disengage the 2 guides and remove the spare wheel cover tray.

  7. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER


    1. B0075CN

      Using a clip remover, remove the 3 clips.

    2. B0077CZ

      Disengage the 6 clips to remove the rear luggage compartment trim cover.

  8. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. B0073PFC01
      B0076EM Fastener

      Using a clip remover, remove the 3 clips.

    2. Disengage the 2 fasteners to remove the front luggage compartment trim cover.

  9. REMOVE REAR SEAT SUB FLOOR PANEL

    Click here

  10. REMOVE NO. 2 ROOM PARTITION COVER

    Click here

  11. REMOVE NO. 1 ROOM PARTITION COVER

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

  12. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  13. REMOVE FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER


    1. B00763H

      Remove the 8 clips.

    2. B0075YI

      Disconnect the front upper luggage compartment trim cover as shown in the illustration.

    3. B0077TLN01

      Disconnect the front upper luggage compartment trim cover as indicated by the arrows, in the order shown in the illustration.

      Note

      Do not damage the front upper luggage compartment trim cover.

    4. B0072Y1

      Remove the front upper luggage compartment trim cover as shown in the illustration.

  14. REMOVE ROPE HOOK ASSEMBLY (for RH Side)


    1. B0076J5

      Disengage the 4 claws and open the 2 covers.

    2. B0075PT

      Remove the 2 bolts and 2 rope hook assemblies.

  15. REMOVE DECK SIDE TRIM BOX RH (for RH Side)


    1. w/ Deck Side Trim Box:


      1. B0074KR

        Disengage the clip and 5 guides to remove the deck side trim box RH.

  16. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH (for RH Side)


    1. B00779B

      Using a clip remover, remove the 5 clips.

    2. B0076K4

      Disengage the claw.

    3. Disengage the clip and guide to remove the luggage compartment trim cover RH.

  17. REMOVE ROPE HOOK ASSEMBLY (for LH Side)


    1. B00769Y

      Disengage the 4 claws and open the 2 covers.

    2. B0077GB

      Remove the 2 bolts and 2 rope hook assemblies.

  18. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH (for LH Side)


    1. B0076FW

      Using a clip remover, remove the 5 clips.

    2. B0073W8

      Disengage the claw.

    3. Disengage the clip and guide to remove the luggage compartment trim cover LH.

  19. REMOVE BACK DOOR STAY SPRING


    1. B0074KA

      Disengage the 2 guides to remove the back door stay spring.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  20. REMOVE BUSH


    1. B0075NT

      Disengage the 2 claws to remove the bush.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  21. REMOVE LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

    Note


    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

    • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

    • Do not apply any horizontal load to the luggage compartment door support assembly in order to prevent the piston rod from deforming.


    1. B0075UAC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, slightly raise the 2 stop rings as indicated by the arrows, in the order shown in the illustration.

    2. Disengage the 2 ball joints to remove the luggage compartment door support assembly.

      Note


      • Remove the luggage compartment door support assembly while supporting the luggage door by hand.

      • Do not remove the stop rings from the luggage compartment door support assembly. Raise the stop rings just enough to allow the ball joints to be disengaged.

      • Do not reuse the luggage compartment door support assembly if stop ring has been removed.

  22. REMOVE BACK DOOR STAY BOLT


    1. B0073SQ

      Remove the back door stay bolt.