ROOF HEADLINING REMOVAL

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE FRONT DOOR SCUFF PLATE LH


    1. B0077VVN01

      Disengage the 2 claws (A).

    2. Disengage the 10 claws (B) and 5 guides to remove the front door scuff plate LH.

  4. REMOVE FRONT DOOR OPENING TRIM COVER LH


    1. B0076BBN01

      Disengage the 3 claws (A) and guide (A).

      Tech Tips

      Disengage the claws and guide from the lower side of the front door opening trim cover LH.

    2. Disengage the claw (B) and guide (B) to remove the front door opening trim cover LH.

  5. REMOVE FRONT PILLAR GARNISH LH


    1. B0077IBC01
      *a Front Pillar Garnish Clip (A)
      *b Front Pillar Garnish Clip (B)
      B0076EM Protective Tape

      Apply protective tape around the front pillar garnish LH as shown in the illustration.

    2. Pull the upper part of the front pillar garnish LH toward the inside of the cabin and disengage the front pillar garnish LH from the base of the 2 front pillar garnish clips.

      Tech Tips

      Let the front pillar garnish LH hang from the 2 front pillar garnish clips.

    3. B0074TG

      While pushing the tabs on the 2 front pillar garnish clips as shown in the illustration, disengage the 2 front pillar garnish clips.

      Note


      • A front pillar garnish clip is reusable if it is not damaged.

      • Do not apply excessive force using a tool.

    4. B0073RI

      Disengage the 3 guides to remove the front pillar garnish LH as shown in the illustration.

    5. B0077QVC01
      *1 Curtain Shield Airbag Assembly LH
      *a Protective Cover
      *b Adhesive Tape

      Protect the curtain shield airbag assembly LH.


      1. Cover the curtain shield airbag assembly LH with a piece of cloth or nylon and secure the edges of the cover with tape as shown in the illustration.

        Note

        Cover the curtain shield airbag assembly LH with a protective cover as soon as the front pillar garnish LH is removed.

  6. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE FRONT DOOR OPENING TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  10. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  11. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

    Click here

  12. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  13. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

  14. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  15. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH


    1. B0074CY

      Remove the bolt and disconnect the belt guide of the rear seat 3 point type outer belt assembly LH.

    2. Remove the 2 clips.

      B0077E5C01
      *A w/o Rear No. 2 Speaker Assembly *B w/ Rear No. 2 Speaker Assembly

    3. Disengage the 4 clips (A).

    4. Disengage the 7 claws, 3 clips (B) and guide to disconnect the front quarter trim panel assembly LH.

      Tech Tips

      Disengage the claws, clips and guide from the front side of the front quarter trim panel assembly LH.

    5. Disengage the clamp.

    6. Disconnect the connector to remove the front quarter trim panel assembly LH.

  16. REMOVE CENTER PILLAR GARNISH ASSEMBLY LH


    1. B00744PN01

      Remove the 2 screws.

    2. Disengage the 2 claws (A).

    3. Disengage the claw (B) and clip to disconnect the center pillar garnish assembly LH.

    4. B0072XN

      Disengage the 4 claws and 2 guides to disconnect the belt guide of the front seat outer belt assembly LH.

    5. Pass the floor anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH to remove it.

  17. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH


    1. B0075CP

      Disengage the claw and 4 clips.

    2. Disengage the guide to remove the inner roof side garnish assembly LH.

  18. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY LH


    1. B0076EK

      Disengage the 3 claws and 2 clips to remove the roof side rail garnish assembly LH.

      Tech Tips

      Disengage the claws and clips from the front side of the roof side rail garnish assembly LH.

  19. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  20. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  21. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  22. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  23. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  24. REMOVE CENTER PILLAR GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  26. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  27. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  28. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Lane Departure Alert System)

    Click here

  29. REMOVE RAIN SENSOR COVER (w/o Lane Departure Alert System)

    w/ Rain Sensor:

    Click here

  30. REMOVE RAIN SENSOR (w/o Lane Departure Alert System)

    w/ Rain Sensor:

    Click here

  31. REMOVE NO. 1 LANE RECOGNITION COVER (w/ Lane Departure Alert System)

    Click here

  32. REMOVE NO. 2 LANE RECOGNITION COVER (w/ Lane Departure Alert System)

    Click here

  33. REMOVE MAP LIGHT ASSEMBLY

    Click here

  34. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

    Click here

  35. REMOVE ASSIST GRIP SUB-ASSEMBLY (for LH Side)


    1. B0073R2C01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the assist grip cover.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. B0077O8

      Disengage the 2 clips and remove the assist grip.

    3. Remove the 2 clips from the vehicle body.

  36. REMOVE VISOR BRACKET COVER (for LH Side)


    1. B0077KL

      Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.

  37. REMOVE VISOR ASSEMBLY LH


    1. B0074QE

      Remove the 2 screws and visor assembly LH.

  38. REMOVE VISOR HOLDER (for LH Side)


    1. B0074FXC08
      *a 45°

      Turn the visor holder approximately 45° and pull it out as indicated by the arrows, in the order shown in the illustration.

    2. Disengage the 2 claws and remove the visor holder.

  39. REMOVE ASSIST GRIP SUB-ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  40. REMOVE VISOR BRACKET COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  41. REMOVE VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  42. REMOVE VISOR HOLDER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  43. REMOVE ROOF HEADLINING ASSEMBLY


    1. for Windshield Glass Side:


      1. Disconnect each connector.

    2. for Front Pillar LH Side:


      1. B0074ZO

        Using a clip remover, disengage the 3 clamps.

      2. Disconnect the 2 connectors.

    3. for Roof Side (w/o Sliding Roof):

      B0072T1

      1. Remove the 2 screws from the 2 coat hooks.

      2. Disengage the 6 claws.

      3. Slide the roof headlining assembly to disengage the 2 clips and 3 guides as shown in the illustration.

        Tech Tips

        Leave the 2 clips installed the vehicle body.

    4. for Roof Side (w/ Sliding Roof):

      B0073DOC01
      *a Fastener *b Guide

      1. Disconnect the connector from the sliding roof drive gear sub-assembly.

      2. Remove the 2 screws from the 2 coat hooks.

      3. Disengage the 6 claws and 8 fasteners.

      4. Slide the roof headlining assembly to disengage the 2 clips and 2 guides as shown in the illustration.

        Tech Tips

        Leave the 2 clips installed the vehicle body.

    5. Remove the roof headlining assembly from the vehicle through the front passenger door as shown in the illustration.

      B0073WC

      Note

      Do not damage the roof headlining assembly or vehicle interior.

    6. B00768G

      Remove the 2 clips from the vehicle body as shown in the illustration.

    7. B0076X4

      Remove the grommet from the vehicle body.

      Tech Tips

      Use the same procedure for the RH side and LH side.