FRONT CONSOLE BOX REMOVAL

PROCEDURE


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01FACI

      Disengage the claw and disconnect the shift hole cover sub-assembly as shown in the illustration.

    2. A01F78M

      Turn the shift lever knob sub-assembly counterclockwise and remove it.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. A01FATGN01

      Using a moulding remover, disengage the 3 clips in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the instrument panel finish panel end LH in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. A01F7KEN01

      Using a moulding remover, disengage the 3 clips in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the instrument panel finish panel end RH in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the instrument panel finish panel end RH.

  4. REMOVE FRONT PANEL GARNISH LH


    1. A01F9QU

      Remove the 2 screws.

    2. Disengage the 5 clips to remove the front panel garnish LH.

  5. REMOVE FRONT PANEL GARNISH RH


    1. A01F84L

      Remove the 2 screws.

    2. Disengage the 5 clips to remove the front panel garnish RH.

  6. REMOVE FRONT NO. 1 CONSOLE BOX INSERT


    1. A01FBIYN01

      Disengage the clip in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the front No. 1 console box insert in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the front No. 1 console box insert.

  7. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    1. A01F9JSN01

      Disengage the clip in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the front No. 2 console box insert in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the front No. 2 console box insert.

  8. REMOVE CONSOLE PANEL SUB-ASSEMBLY


    1. A01F8R7

      Remove the screw.

    2. Move the shift lever to N.

    3. Disengage the 8 claws, clip and 4 guides as shown in the illustration.

      A01F90S

    4. Disconnect each connector to remove the console panel sub-assembly.

  9. REMOVE NO. 2 CONSOLE BOX SILENCER PAD


    1. A01F8P6

      Remove the 2 No. 2 console box silencer pads.

  10. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    1. A01F7RP

      Disengage the clamp.

    2. Remove the 5 screws and remove the instrument panel cup holder assembly.

  11. REMOVE CONSOLE BOX REGISTER ASSEMBLY


    1. A01F89J

      Using a moulding remover, disengage the 4 claws, 4 clips and guide and remove the console box register assembly as shown in the illustration.

  12. REMOVE CONSOLE BOX ASSEMBLY


    1. A01F6XT

      Remove the 6 bolts.

    2. A01F99E

      Pull the rear part of the console box assembly as shown in the illustration to disengage the 2 guides and remove the console box assembly.

    3. Disconnect each connector.