CONDENSER(for 2GR-FKS) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  3. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  4. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  5. DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

    Click here

  6. REMOVE HOOD LOCK ASSEMBLY

    Click here

  7. DISCONNECT ENGINE ROOM MAIN WIRE

    Click here

  8. REMOVE UPPER RADIATOR SUPPORT

    Click here

  9. DISCONNECT LIQUID TUBE SUB-ASSEMBLY A


    1. B0077YI

      Disengage the claw to open the service hole cover.

    2. B0077IU

      Remove the bolt.

    3. B007620

      Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.

    4. Remove the O-ring from the liquid tube sub-assembly A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  10. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B0073ML

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  11. REMOVE COOLER CONDENSER ASSEMBLY


    1. B0072W7

      Disengage the 2 claws.

    2. Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.