COMPRESSOR REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE V-RIBBED BELT

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  4. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01R5GD

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnetic clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. DISCONNECT SUCTION HOSE


    1. A01R5PO

      Remove the bolt and disconnect the suction hose from the compressor and magnetic clutch.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  7. REMOVE COMPRESSOR AND MAGNETIC CLUTCH


    1. A01R70Z

      Disconnect the 2 connectors.

    2. Disengage the clamp.

    3. A01R5V4

      Remove the 3 bolts and nut.

    4. A01R6YM

      Using an E8 "TORX" socket wrench, remove the stud bolt and compressor and magnetic clutch.

      Tech Tips

      Remove the compressor and magnetic clutch from the vehicle with the stud bolt remaining in the compressor and magnetic clutch.