FRONT SEATBACK HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK HEATER (FRONT SEATBACK PAD WITH COVER)

    Tech Tips

    The front seatback heater cannot be removed from the front seatback pad with cover as they are a unit.


    1. Temporarily install the front seatback heater (front seatback pad with cover).

      Note

      Be careful not to damage the front seatback pad with cover.

    2. B0074OWC01
      *a Bracket

      Engage the 2 brackets and install the front seatback heater (front seatback pad with cover) with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the front seatback pad with cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. w/ Climate Control Seat System:


      1. B00739I

        Engage the 2 claws to install the seatback climate control blower to the front seatback pad with cover.

    4. B0072X6

      Engage the clamp.

    5. Connect the connector.

  2. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  3. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY

    Click here

  4. INSTALL RECLINING REMOTE CONTROL CAP

    Click here

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  6. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  7. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Click here

  8. CONNECT FRONT SEATBACK PAD WITH COVER

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here