POWER SEAT SWITCH INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY


    1. B00740U

      Install the position control ECU and switch assembly to the front seat cushion shield with the 3 screws.

  2. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  4. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  5. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Click here

  6. CONNECT FRONT SEATBACK PAD WITH COVER

    Click here

  7. INSTALL FRONT SEAT ASSEMBLY

    Click here