OCCUPANT DETECTION SENSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  2. DISCONNECT FRONT SEATBACK PAD WITH COVER

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  3. REMOVE INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  6. REMOVE OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD WITH COVER)

    Tech Tips

    The occupant detection sensor cannot be removed from the front seat cushion pad with cover as they are a unit.


    1. B0077EEC01
      B0073NQ Fastener

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. w/ Seat Heater System:


      1. B0077P4

        Disconnect the connector.

      2. Disengage the clamp.

      3. B0077Z6

        Disengage the 3 clamps.

      4. Disconnect the 2 connectors.

    3. B00756G

      Disconnect the connector.

    4. B00734K

      Disengage the claw to separate the connector.

    5. B0074N4

      Remove the clip.

    6. B00730H

      Disengage the hook.

    7. B0073NC

      Disengage the 7 hooks and remove the occupant detection sensor (front seat cushion pad with cover).