METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Small 10:Large,00:Medium,01:Small Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the engine switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly