LIGHTING SYSTEM OPERATION CHECK

INSPECT ILLUMINATED ENTRY SYSTEM OPERATION

Note

Perform this inspection with the customize parameters at the initial settings.

Tech Tips

Perform this inspection with the door switch of the map light assembly on.

Lights Controlled by Illuminated Entry System
Control	Condition	Lights that Operate
Actuation Area-linked	With the engine switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off.	Front Dome Light Rear Dome Light Footwell Light
Door Lock/Unlock-linked	With the engine switch off and all of the doors closed and locked, unlock either front door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off.	Front Dome Light Rear Dome Light Engine Switch Illumination Remote Touchpad Illumination Light Footwell Light
Door Open/Close-linked	With the engine switch off and all of the doors closed, open either front door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds.	Front Dome Light Rear Dome Light Engine Switch Illumination Remote Touchpad Illumination Light Footwell Light
Door Open/Close-linked	With the engine switch on, open either front door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off.	Front Dome Light Rear Dome Light Engine Switch Illumination Footwell Light
Engine Switch-linked	Turn the engine switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off.	Front Dome Light Rear Dome Light Engine Switch Illumination Footwell Light
	Turn the engine switch on (ACC) or on (IG) and check that the lights that operate turn on.	Ambient Illumination Light Engine Switch Illumination Remote Touchpad Illumination Light
	Turn the engine switch from on (ACC) or on (IG) to off and check that the lights that operate turn off.	Ambient Illumination Light
	After shift position-linked control has operated and the light that operates has dimmed, turn the engine switch off and check that the light that operates returns to full brightness. Then check that the light that operates turns off after approximately 15 seconds.	Remote Touchpad Illumination Light
Shift position-linked	With the engine switch on (ACC) or on (IG), move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness.	Ambient Illumination Light
Shift position-linked	With the engine switch on (ACC) or on (IG) and all of the doors closed, move the shift lever from P to any other position and check that the lights that operate dim.	Remote Touchpad Illumination Light*

*: After the engine switch is turned on (ACC) or on (IG), this light dims only the first time the shift lever is moved. This light stays dimmed even if the shift lever is moved to P.

INSPECT BATTERY SAVING CONTROL OPERATION

The operations and conditions of this control are described below.

Control	Condition	Lights that Operate
Basic operation	When 20 minutes elapse after the engine switch is turned from on (ACC or IG) to off and the lights that operate remain on, the lights are turned off. Tech Tips Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off. The engine switch is turned on (ACC or IG). Any door is opened and closed. The luggage compartment door is opened and closed. Any door is unlocked. The key enters any exterior actuation area.	Front Dome Light Rear Dome Light Engine Switch Illumination Remote Touchpad Illumination Light Footwell Light Vanity Light Assembly No. 1 Luggage Compartment Light Assembly Courtesy Light Assembly
Interior light auto cut operation	When 20 minutes elapse after the engine switch is turned from on (ACC or IG) to off and the lights that operate remain on, the lights are turned off. Tech Tips Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off. The engine switch is turned on (ACC or IG).	Front Dome Light Rear Dome Light Footwell Light Vanity Light Assembly No. 1 Luggage Compartment Light Assembly Courtesy Light Assembly