DOOR CONTROL RECEIVER(for Package Tray) INSTALLATION

PROCEDURE

1. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY

   
   

   1. Engage the guide.

   2. Install the smart door control receiver assembly with the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   3. Connect the connector.

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

   Click here

3. INSTALL NO. 3 ROOM PARTITION COVER

   Click here

4. INSTALL NO. 2 ROOM PARTITION COVER

   Click here

5. INSTALL NO. 1 ROOM PARTITION COVER

   Tech Tips

   Use the same procedure as for the No. 2 room partition cover.

6. INSTALL REAR SEAT SUB FLOOR PANEL

   Click here

7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

   Click here

9. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

10. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Click here

11. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

12. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

13. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

14. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

15. INSTALL REAR SEAT ASSEMBLY

    Click here