DOOR CONTROL RECEIVER(for Rear Pillar) REMOVAL

PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

2. REMOVE REAR SEAT CUSHION ASSEMBLY

   Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

   Click here

4. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Click here

5. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

   Click here

6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

   Click here

7. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

8. REMOVE ELECTRICAL KEY AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Remove the bolt.

   3. Disengage the 2 guides to remove the electrical key and tire pressure monitoring system receiver assembly.