FRONT DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY


    1. w/o Double Locking System:


      1. B0077MC

        Install the front door inside locking cable assembly as shown in the illustration.

    2. w/ Double Locking System:


      1. B00749N

        Install the front door inside locking cable assembly as shown in the illustration.

      2. B0074JA

        Engage the 3 claws as shown in the illustration.

  3. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY


    1. B007427

      w/o Double Locking System:


      1. Install the front door lock remote control cable assembly as shown in the illustration.

    2. w/ Double Locking System:


      1. B0074US

        Install the front door lock remote control cable assembly as shown in the illustration.

  4. INSTALL FRONT DOOR LOCK COVER SUB-ASSEMBLY (w/o Double Locking System)


    1. Engage the 2 claws.

    2. B0075AN

      Engage the 2 claws to install the front door lock cover sub-assembly as shown in the illustration.

  5. INSTALL FRONT DOOR LOCK WITH MOTOR ASSEMBLY

    Click here

  6. INSTALL FRONT DOOR LOCK CYLINDER ASSEMBLY (for Driver Side)

    Click here

  7. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY (for Driver Side)

    Click here

  8. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  9. INSTALL FRONT DOOR UPPER WINDOW STOP

    Click here

  10. INSPECT FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  11. ADJUST FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  12. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click here

  13. INSTALL OUTER MIRROR INSTALL HOLE COVER

    Click here

  14. INSTALL FRONT DOOR TRIM BRACKET

    Click here

  15. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  16. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  17. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  18. INSTALL DOOR TRIM COVER

    Click here

  19. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  20. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  21. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  23. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  24. INSPECT POWER WINDOW OPERATION

    Click here