FRONT DOOR LOCK REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  4. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  6. REMOVE DOOR TRIM COVER

    Click here

  7. REMOVE COURTESY LIGHT ASSEMBLY

    Click here

  8. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  9. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  10. REMOVE FRONT DOOR TRIM BRACKET

    Click here

  11. REMOVE OUTER MIRROR INSTALL HOLE COVER

    Click here

  12. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  13. REMOVE FRONT DOOR UPPER WINDOW STOP

    Click here

  14. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  15. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY (for Driver Side)

    Click here

  16. REMOVE FRONT DOOR LOCK CYLINDER ASSEMBLY (for Driver Side)

    Click here

  17. REMOVE FRONT DOOR LOCK WITH MOTOR ASSEMBLY

    Click here

  18. REMOVE FRONT DOOR LOCK COVER SUB-ASSEMBLY (w/o Double Locking System)


    1. B0076KF

      Using a screwdriver, disengage the 2 claws as shown in the illustration.

    2. B00776I

      Disengage the 2 claws to remove the front door lock cover sub-assembly.

  19. REMOVE FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY


    1. w/o Double Locking System:


      1. B0073C0

        Remove the front door lock remote control cable assembly as shown in the illustration.

    2. w/ Double Locking System:


      1. B00750I

        Remove the front door lock remote control cable assembly as shown in the illustration.

  20. REMOVE FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY


    1. w/o Double Locking System:


      1. B00781H

        Remove the front door inside locking cable assembly as shown in the illustration.

    2. w/ Double Locking System:


      1. B0076H5

        Using a screwdriver, disengage the 3 claws as shown in the illustration.

      2. B0076UT

        Remove the front door inside locking cable assembly as shown in the illustration.