NAVIGATION RECEIVER INSTALLATION

PROCEDURE

1. PRECAUTION (w/ Telematics Transceiver)

   Note

   When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL RADIO RECEIVER ASSEMBLY

3. INSTALL HARD DISK DRIVE (w/ Telematics Transceiver)

   Click here

4. INSTALL NO. 1 RADIO BRACKET

   Click here

5. INSTALL NO. 2 RADIO BRACKET

   Click here

6. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

   Click here

7. INSTALL CONSOLE PANEL SUB-ASSEMBLY

   Click here

8. INSTALL FRONT PANEL GARNISH RH

   Click here

9. INSTALL FRONT PANEL GARNISH LH

   Click here

10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

11. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here