VACUUM PUMP(for 2GR-FKS) COMPONENTS
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | NO. 2 ENGINE WIRE | *2 | BATTERY |
| *3 | BATTERY INSULATOR | *4 | BATTERY CLAMP |
| *5 | POSITIVE BATTERY TERMINAL | *6 | NEGATIVE BATTERY TERMINAL |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *1 | INTAKE AIR SURGE TANK ASSEMBLY | *2 | AIR SURGE TANK TO INTAKE MANIFOLD GASKET |
| *3 | NO. 2 SURGE TANK STAY | *4 | NO. 2 WATER BY-PASS PIPE |
| *5 | NO. 2 WATER BY-PASS HOSE | *6 | PURGE VALVE (PURGE VSV) |
| *7 | VACUUM HOSE ASSEMBLY | *8 | NO. 1 HOSE TO HOSE TUBE |
| *9 | WIRE HARNESS | *10 | VENTILATION HOSE ASSEMBLY |
| *11 | STUD BOLT | *12 | WIRE HARNESS CLAMP BRACKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with SST |
| ● | Non-reusable part |  |
Do not apply lubricants to the threaded parts |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | INLET HEATER WATER HOSE A | *2 | NO. 12 WATER BY-PASS HOSE |
| *3 | NO. 2 WATER BY-PASS PIPE | *4 | OUTLET HEATER WATER HOSE A |
| *5 | UNION TO CONNECTOR TUBE HOSE | *6 | VACUUM PUMP ASSEMBLY |
| *7 | NO. 2 O-RING | *8 | NO. 3 O-RING |
| *9 | WATER HOSE SET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Engine oil | - | - |
ILLUSTRATION
| *1 | END COVER | *2 | VACUUM PUMP VANE |
| *3 | VACUUM PUMP HOUSING | *4 | VACUUM PUMP VANE CAP |
| *5 | NO. 1 O-RING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Engine oil | - | - |