PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Stop and Start System | |
| Variable Gear Ratio Steering System | |
| Parking Assist Monitor System (w/ Parallel Parking Assist Function) | |
| Parking Assist Monitor System (w/o Parallel Parking Assist Function) | |
| Air Conditioning System |
ADAPTIVE VARIABLE SUSPENSION SYSTEM PRECAUTION
Note
Performing work after replacing the absorber control ECU with a normally functioning one from another vehicle may result in DTCs being stored, or have a negative effect on other systems. When replacing the absorber control ECU, be sure to install a new one.
After replacing the absorber control ECU, enter test mode to make sure that all the test mode DTCs can be cleared and to perform registration of vehicle identification information.