SHIFT LEVER REMOVAL

PROCEDURE


  1. REMOVE SHIFT LEVER CAP


    1. B0075VOC01
      *a Protective Tape

      Using a screwdriver, disengage the 2 claws as shown in the illustration and remove the shift lever cap from the shift position indicator.

      Note

      Do not damage the shift lever cap and shift position indicator.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)


  3. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

    Click here

  4. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. B0073Z1C01
      *a Lever

      Remove the nut and disconnect the floor shift gear shifting rod sub-assembly from the lever of the transmission floor shift assembly.

  5. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  6. REMOVE NO. 1 CONSOLE BOX DUCT


    1. B0073CI

      Disengage the clamp to disconnect the wire harness from the No. 1 console box duct.

    2. B0072XL

      Remove the 2 clips and No. 1 console box duct.

  7. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY


    1. B00773V

      Disconnect the shift lock control ECU connector.

    2. B0074X3

      Disengage the 4 clamps to disconnect the wire harness from the transmission floor shift assembly.

    3. B0076C8

      Disconnect the transmission control switch connector.

    4. B0074D3

      Remove the 4 bolts and transmission floor shift assembly from the vehicle body.