PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. B00777HC01
      *a Pin

      Remove the clip and pin, and disconnect the floor shift gear shifting rod sub-assembly from the transmission control shaft lever RH.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01F8Z8

      Disconnect the park/neutral position switch assembly connector.

    2. A01FAE5

      Remove the nut, spring washer and transmission control shaft lever RH from the manual valve lever shaft.

    3. B0075FUC02
      *a Lock Washer
      *b Lock Nut

      Using a screwdriver, bend back the tabs of the lock washer and remove the lock nut and lock washer from the park/neutral position switch assembly.

    4. A01F8A1

      Remove the bolt and park/neutral position switch assembly from the automatic transmission assembly.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.