TRANSMISSION WIRE(for 8AR-FTS) INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION WIRE

   
   

   1. Coat the O-ring of the transmission wire with ATF.

   2. Install the transmission wire with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      
      

      • When reusing the transmission wire, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the transmission wire.

   3. 

      Connect the transmission wire connector and raise the lever to engage the claw.

      Tech Tips

      Push up the lever until the claw of the transmission wire connector makes a connection sound.

   4. Connect the transmission revolution sensor (SP2) connector.

   5. Connect the transmission revolution sensor (NT) connector.

   6. Connect the transmission revolution sensor (NC3) connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here