TRANSMISSION WIRE(for 8AR-FTS) REMOVAL

PROCEDURE

1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

   Click here

2. REMOVE TRANSMISSION WIRE

   
   

   1. 

      *a	Transmission Revolution Sensor (NC3) Connector
      *b	Transmission Revolution Sensor (NT) Connector
      *c	Transmission Revolution Sensor (SP2) Connector

      Disconnect the transmission revolution sensor (NC3) connector.

   2. Disconnect the transmission revolution sensor (NT) connector.

   3. Disconnect the transmission revolution sensor (SP2) connector.

   4. 

      Disengage the claw, pull down the lever, and then disconnect the transmission wire connector.

   5. 

      Remove the bolt and transmission wire.