SHIFT PADDLE SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 1 SWITCH WIRE (w/ Lane Departure Alert System)

   Tech Tips

   Perform this procedure only when replacement of the No. 1 switch wire is necessary.

   
   

   1. Engage the 4 guides to install the No. 1 switch wire to the lower steering wheel boss cover.

      Note

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

   2. Install steering vibration and heater ECU.

      Click here

   3. Install steering pad switch assembly.

      Click here

   4. Install cruise control main switch.

      Click here

2. INSTALL NO. 2 SWITCH WIRE (w/o Lane Departure Alert System)

   Tech Tips

   Perform this procedure only when replacement of the No. 2 switch wire is necessary.

   
   

   1. Engage the 2 guides to install the No. 2 switch wire to the steering wheel assembly.

3. INSTALL NO. 1 SWITCH WIRE (w/o Lane Departure Alert System)

   Tech Tips

   Perform this procedure only when replacement of the No. 1 switch wire is necessary.

   
   

   1. Engage the 5 guides to install the No. 1 switch wire to the steering wheel assembly.

   2. Connect the No. 1 switch wire connector.

   3. Engage the No. 2 switch wire connector clamp to the steering wheel assembly.

4. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

   
   

   1. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the 2 shift paddle switches (transmission shift switch assemblies) to the No. 1 switch wire.

   2. Engage the 4 claws and 2 guides to connect the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.

   3. Install 4 new screws.

      Torque:

      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

5. INSTALL STEERING WHEEL ASSEMBLY (w/ Lane Departure Alert System)

   Click here

6. INSTALL STEERING WHEEL ASSEMBLY (w/o Lane Departure Alert System)

   Click here