AUTOMATIC TRANSMISSION SYSTEM(for 2GR-FKS) MANUAL SHIFTING TEST


  1. MANUAL SHIFTING TEST

    Tech Tips


    • Using this test, it can be determined whether a problem is in an electrical circuit or if it is a mechanical problem in the transmission.

    • If any abnormalities are found in the following test, the problem is in the transmission itself.


    1. B0073DX

      Disconnect the transmission wire connector.

      Tech Tips

      It is possible to deactivate the electrical shift control by disconnecting the transmission wire. The gears can then be changed mechanically with the shift lever.

    2. Drive the vehicle with the transmission wire disconnected. Move the shift lever to each position to check whether the gear changes as shown in the table below.

      Shift Lever Position Gear
      P P
      R R
      D

      3rd

      No Shift (Gears will not change)

    3. Connect the transmission wire connector.

    4. Clear the DTCs.

      Click here