BACKUP BOOST CONVERTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Tech Tips

    Use the same procedure for RHD and LHD.

    Click here

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for RHD)

    Click here

  6. REMOVE FRONT NO. 2 CONSOLE BOX INSERT (for LHD)

    Click here

  7. REMOVE FRONT NO. 1 CONSOLE BOX INSERT (for RHD)

    Click here

  8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Tech Tips

    Use the same procedure for RHD and LHD.

    Click here

  9. REMOVE ECO RUN VEHICLE CONVERTER ASSEMBLY


    1. Move the lock lever as shown in the illustration and disconnect the eco run vehicle converter assembly connector.

      B0074S2C02
      *A for LHD *B for RHD
      *a Lock Lever - -

    2. Remove the 2 bolts and eco run vehicle converter assembly.

      B0077M8C01
      *A for LHD *B for RHD