ENGINE STOP AND START ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. READ NUMBER OF STARTER OPERATIONS

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  6. REMOVE FRONT NO. 2 CONSOLE BOX INSERT (for LHD)

    Click here

  7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  8. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Click here

  9. REMOVE FRONT DOOR OPENING TRIM COVER RH (for RHD)

    Click here

  10. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  12. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)

    Click here

  13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)

    Click here

  14. REMOVE ECU INTEGRATION BOX RH WITH ENGINE STOP AND START ECU (for LHD)


    1. B0073ZD

      Disconnect the 3 engine stop and start ECU connectors.

    2. B0076C3C02
      B0073AQ Bolt
      B0077IM Nut

      Remove the bolt, nut and ECU integration box RH with engine stop and start ECU.

  15. REMOVE ENGINE STOP AND START ECU (for LHD)


    1. B00766O

      Disengage the 2 claws and remove the engine stop and start ECU as shown in the illustration.

  16. REMOVE ENGINE STOP AND START ECU (for RHD)


    1. B0076KG

      Disconnect the 3 engine stop and start ECU connectors.

    2. B0073A5

      Remove the 2 nuts and engine stop and start ECU.