MILLIMETER WAVE RADAR SENSOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE LOW PITCHED HORN ASSEMBLY

    Click here

  4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. A01R3C9

      Disconnect the connector.

    2. Disengage the clamp.

    3. A01R5B9

      Remove the 3 bolts.

    4. Disengage the 2 guides.

    5. A01R7ID

      Remove the millimeter wave radar sensor assembly as shown in the illustration.