| DTC Code | DTC Name |
|---|---|
| C1A52 | Driving Support ECU Communication Abnormal |
DESCRIPTION
The DTC C1A52 is stored when the ECM cannot recognize the driving support ECU assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A52 | Driving Support ECU Communication Abnormal | When the cruise control switch is on and the vehicle is being driven at a speed of 36 km/h (22 mph) or more, the ECM cannot recognize the driving support ECU assembly for 2 seconds or more. |
|
PROCEDURE
CHECK FOR DTCs (RADAR CRUISE)
Clear the DTCs.
Make sure that the DTC detection conditions are met.
Tech Tips
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
REPLACE ECM
Replace the ECM with a new one.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTCs (RADAR CRUISE)
Clear the DTCs.
Make sure that the DTC detection conditions are met.
Tech Tips
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
Note
When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
END (ECM WAS DEFECTIVE) |
| B |
|
REPLACE DRIVING SUPPORT ECU ASSEMBLY Click here |