STARTER INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

   
   

   1. Install the starter assembly with the 2 bolts.

      Torque:

      58 N*m  { 591 kgf*cm, 43 ft.*lbf }

   2. Connect terminal 30 with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   3. Close the terminal cap.

   4. Connect the starter assembly connector.

2. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH(TWC: Front Catalyst)

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here