OIL PRESSURE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. B007548C07
      *a Adhesive 1324

      Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

      Note


      • Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.

      • Install the engine oil pressure switch assembly within 3 minutes of applying adhesive.

    2. B0074PFC05
      *A Type A
      *B Type B

      Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:
      Type A
      14.7 N*m  { 150 kgf*cm, 11 ft.*lbf }
      Type B
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Do not start the engine within 1 hour of installation.

    3. Connect the engine oil pressure switch assembly connector.

  2. ADD ENGINE OIL

    Click here

  3. INSPECT ENGINE OIL LEVEL

    Click here

  4. INSPECT FOR ENGINE OIL LEAK

    Click here

  5. INSTALL INLET NO. 1 AIR CLEANER

    Click here

  6. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  7. INSTALL ENGINE ROOM SIDE COVER

    Click here