RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL LOWER RADIATOR SUPPORT


    1. Install the 2 lower radiator supports to the radiator assembly.

  2. INSTALL RADIATOR SUPPORT CUSHION


    1. Install the 2 radiator support cushions to the radiator assembly.

  3. INSTALL RADIATOR ASSEMBLY


    1. Install the radiator assembly to the vehicle body.

      Note

      Do not apply excessive force to the cooler condenser assembly, radiator assembly (for intercooler) or pipe when installing the radiator assembly.

    2. Engage the 2 guides.

    3. Engage the 2 claws to install the radiator assembly (for intercooler) and cooler condenser assembly to the radiator assembly.

      Note

      Make sure not to damage the cooler condenser assembly or radiator assembly (for intercooler) when installing the radiator assembly.

  4. INSTALL FAN SHROUD ASSEMBLY


    1. Engage the 3 guides.

    2. Engage the 3 claws to install the fan shroud assembly to the radiator assembly.

      Note

      Make sure not to damage the radiator assembly when installing the fan shroud assembly.

  5. INSTALL UPPER RADIATOR SUPPORT


    1. Install the upper radiator support with the 5 bolts.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

    2. Engage the 5 clamps to connect the wire harness to the upper radiator support.

    3. Connect the smog ventilation sensor connector.

    4. Connect the 2 horn connectors.

  6. CONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY


    1. Connect the No. 2 radiator hose sub-assembly to the fan shroud assembly with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Install a new radiator hose clamp to the fan shroud assembly.

    3. Connect the No. 2 radiator hose sub-assembly to the radiator hose clamp.

    4. Connect the No. 2 radiator hose sub-assembly to the radiator assembly and slide the clip to secure it.

  7. INSTALL RADIATOR HOSE SUB-ASSEMBLY


    1. Install the radiator hose sub-assembly to the radiator assembly and water inlet and slide the 2 clips to secure it.

  8. INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. Engage the 2 claws to install the radiator reserve tank assembly to the fan shroud assembly.

    2. Engage the 2 clamps to connect the reserve tank outlet hose to the fan shroud assembly.

    3. Connect the reserve tank outlet hose to the radiator reserve tank assembly and slide the clip to secure it.

    4. Engage the clamp to connect the radiator reserve tank hose to the fan shroud assembly.

    5. Connect the radiator reserve tank hose to the radiator assembly and slide the clip to secure it.

  9. CONNECT ENGINE ROOM MAIN WIRE


    1. Engage the 4 clamps to connect the engine room main wire to the upper radiator support.

    2. for Cooling Fan Motor 240 W + 240 W Type:


      1. Connect the connector.

      2. Connect the cooling fan ECU connector.

      3. Engage the clamp.

    3. for Cooling Fan Motor 300 W + 300 W Type:


      1. B0077XIC01
        *a Lock Lever

        Connect the connector.

      2. Connect the cooling fan motor connector and push down the lock lever to engage the claw as shown in the illustration.

        Note


        • When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.

        • Be sure to securely connect the cooling fan motor connector.

      3. Engage the clamp.

  10. INSTALL ENGINE ROOM ECU OUTLET DUCT


    1. Install the engine room ECU outlet duct to the fan shroud assembly and engine room ECU box.

  11. CONNECT HOOD LOCK CONTROL CABLE ASSEMBLY


    1. Engage the clamp to connect the hood lock control cable assembly to the upper radiator support.

  12. INSTALL HOOD LOCK CONTROL CABLE COVER

    Click here

  13. INSTALL HOOD LOCK ASSEMBLY

    Click here

  14. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  15. INSTALL INLET NO. 1 AIR CLEANER

    Click here

  16. ADD ENGINE COOLANT

    Click here

  17. INSPECT FOR COOLANT LEAK

    Click here

  18. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  19. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  20. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  21. INSTALL ENGINE ROOM SIDE COVER

    Click here