THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE CENTER NO. 4 ENGINE UNDER COVER

    Click here

  2. DRAIN ENGINE COOLANT

    Click here

  3. REMOVE ECM

    Click here

  4. REMOVE ENGINE ROOM ECU OUTLET DUCT

    Click here

  5. REMOVE RADIATOR HOSE SUB-ASSEMBLY

    Click here

  6. REMOVE ENGINE ROOM ECU BOX

    B0073N9

    1. Disconnect the 3 connectors from the connector holder.

    2. Disengage the claw and disconnect the engine wire harness from the engine room ECU box.

    3. B0077WM

      Disengage the claw and disconnect the connector holder from the engine room ECU box.

    4. B0072RS

      Remove the 2 bolts, nut and engine room ECU box.

  7. DISCONNECT NO. 4 RADIATOR HOSE

    B0072ZR

    1. Slide the clip and disconnect the No. 4 radiator hose from the water inlet.

  8. REMOVE WATER INLET


    1. B0077AZ

      Disengage the 3 clamps to disconnect the wire harness from the water inlet.

    2. B0073CF

      Remove the 2 bolts, nut and water inlet.

  9. REMOVE THERMOSTAT


    1. Remove the thermostat from the water inlet housing sub-assembly.

    2. Remove the gasket from the thermostat.