COOLING FAN SYSTEM ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT COOLING FAN SYSTEM


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine / Active Test / Control the Engine Cooling Fan Duty Ratio.


      Powertrain > Engine > Active Test
      Tester Display
      Control the Engine Cooling Fan Duty Ratio

    5. Check the operation of the fan while operating it using the GTS.

      OK
      Tester Operation Fan Operation
      30 - 100% Cooling fans operate
      0% Cooling fans stop

      If the cooling fan motor does not operate, check the cooling fan circuit.

      Click here