TURBOCHARGER PRECAUTION


  1. MAINTENANCE PRECAUTION


    1. If the turbocharger sub-assembly is found to be defective, it must be replaced. Make sure to identify the cause of the problem including the conditions under which the turbocharger sub-assembly was used. Repair or replace the following as necessary:


      1. Engine oil (level and quality)

      2. Oil lines leading to the turbocharger sub-assembly

    2. Be careful when removing and reinstalling the turbocharger sub-assembly. Do not drop, strike, or grasp easily-deformed components.

      Note


      • A01R4DF

        Do not hold the turbocharger sub-assembly by the waste gate valve actuator rod.

      • A01R7IH

        When storing the turbocharger sub-assembly, do not place it with the waste gate valve actuator facing down.

      • Make sure foreign matter does not enter the intake and exhaust ports or oil passage.

    3. A01R6ZV

      If replacing the turbocharger sub-assembly, check for deposits in the inlet turbo oil pipe sub-assembly. If necessary, replace the inlet turbo oil pipe sub-assembly.

    4. A01R5N7

      If replacing the turbocharger sub-assembly, add 20 cc (1.2 cu. in.) of new engine oil to the turbocharger oil inlet hole and turn the turbine wheel by hand to lubricate the bearings.